Anker Power Bank

Set Up Guide

Shipment Content:
1 x Anker Prime Power Bank
1 x Anker Charging Base
1 x Power Cable

Quick Guide:

Recharging your device(s):
1. USB-C: Connect your device(s) to either or both USB-C port using the compatible cable. The power bank supports up to 100W output, suitable for laptops, tablets, and smartphones.
2. USB-A: Connect your device to USB-A port using the compatible cable. The power bank supports up to 65W output, suitable for smartphones and smaller devices. The total power output across all ports combined is capped at 200W.

Trickle-Charging Mode:
1. Press the power button twice to enter tricklecharging mode. You will see a green dot on the top left corner of the screen when it is activated correctly.
2. Connect your accessory device using the corresponding cable.
3. Press the power button twice to exit tricklecharging mode.

Recharging the Power Bank:
1. Connect the provided power cable to the AC input port on the charging base.
2. Place the power bank horizontally on the charging base. Aligning the contact pins of the bank to the base.
3. Check the LED indicator on the front section of the charging base for more information:

a. Pulsing white: Power bank is charging
b. Solid white: Power bank is fully charged
c. Rapid pulsing: AC power is On

4. The charging base provides two additional USB-C ports and one USB-A port with a total output of 100W. Using the side ports will reduce the power banks charging speed. The Power Bank does not charge devices while on the dock, please use the dock ports.

LCD Screen Guide:
1. Tap the screen once to display essential information.
2. Displays remaining battery, recharging time*, output and input information*. *With compatible devices and cables.

Manufacturer Documentation

Charging Base Quick Startup Guide

Quick Start Guide