Premium Floor Stand

Set Up Guide

1. Remove the stand pieces from the rental box.
2. Place floor Base Plate vertically and align the pole to the center hole.
3. Insert the screw into the bottom of the base plate and tighten it into the thread of the stand pole using the provided screwdriver. Once secured, stand the stand on it’s base.
4. Align the iPad inside the enclosure’s front face and place the brackets inside to secure the iPad into place.
5. Connect the charging cable to the iPad and place it on the mounting plate.
6. Press the lock in to secure the enclosure.
7. Loosen the bolts on the clamp as needed and slide the clamp over the top of the pole. Be sure not to block the opening on the pole to hide the iPad charging cable.
8. Run the iPad’s charging cable through the top opening and bottom opening of the stand and pull it from the bottom hole in the base. Plug to power.
9. Rotate the iPad from portrait to landscape by twisting the faceplate in the desired direction.
10. Optional Accessory – Cable Lock– Wrap the cable lock around a solid object and pass the lock through the loop.
11. Insert the lock into the small slot on the back of the iPad stand. Then lock it with the provided key.