Event Kiosk Plus™

Set Up Guide

1. Lay the kiosk and top panel flat on a stable surface
   
   
2. Open up the side panels of the kiosk. (Remember that the side with the bottom lip is the front.)
   
   
3. Place the Epson printer inside the kiosk.
   
4. With help, lift the side-panels and slide the top panel into the grooves at both sides, securing them together. 
   
5. Push the top panel all the way to the back. 
   
   
6. Flatten the tablet enclosure base.
   
7. Place the tablet enclosure on top. 
   
8. Screw in the tablet enclosure.
   
   
9. Run the charging cable through the enclosure.
   - Find the 90-degree end that goes to the iPad.
   
   - The other end goes out.
   
10. Install your tablet & connect it to the charging cable.
    
    
    
11. Close the enclosure.
    
    
    
    
12. Now, follow the Epson printer guide to complete your setup.

Setup Video