GL.iNET GL-XE300

Set Up Guide

1. Plug in the Type C cable and turn On the router by holding the power button for 3 seconds.
   Allow 5 minutes for the WiFi LED to turn on. If the unit is charged it can be used unplugged
   for up to 4 hours (varies by usage).
2. Connect your Wired devices via the Mini Switch (e.g., Ethernet-enabled Printer).
   Plug in the Micro or Mini USB to the Mini Switch and the other end of the USB Type A to the router.
   This device allows you to connect to 4 wired devices via Ethernet.
3. Connect one of the Ethernet Cables to the router and the other end to Port 1 of the Mini Switch.
   Now you can connect multiple Ethernet cables to the Mini Switch Ports 2–5 and the other end to a Printer or PC.
4. Connect your Wireless devices (e.g., Tablet / PC). Search with your device for the
   SSID (Wireless Network Name), it is labeled on the top of the router.
   Use the password in your Important Documents Folder to connect wirelessly.
5. To connect to an Internet Hardline, simply connect an RJ45 Ethernet cable from the Venue’s live port
   into the router WAN port. The router will prioritize the hardline over cellular data.

Download this Guide

GL-XE300-Setup-Guide-v1

Manufacturer Documentation

Design Templates

gli-net-gl-300-quick-setup