Lenovo ThinkBook 14

Set Up Guide

Shipment Content:

• 1 x Laptop
• 1 x Wired Mouse
• 1 x Power Adapter (2 Parts)

1. Remove the Laptop from its case. Turn on the laptop. Carefully open it and press the POWER button located on the top right of the keyboard.

2. Press any key when Windows starts to open the Windows Login Screen. Type in Password as your password.

3. Charge the laptop by connecting the Power Cord into the AC adapter and connect the USB-C into either of the C port on the left side of the laptop.

4. Connecting to Wi-Fi. a. At the bottom right of the screen, left click the Wi-Fi icon to display available networks. b. Select your network and connect. Input your network password when prompted.

5. Connecting the LAN (RJ45) cable. a. Carefully open the LAN port on the right side of the laptop. b. Insert the LAN cable, making sure it is in the correct orientation, with the clip facing down.

6. To disconnect the LAN cable.

• Carefully press down the clip at the end of the LAN cable.
• While holding down the clip pull out the LAN cable. Cable should come out without too much force. If the cable does not come out easily, please verify that you are holding the clip correctly.

 

 

 

Troubleshooting

What if the laptop freezes?

Right Click the taskbar then choose the Task Manager. Select any program that’s causing the issue and click the 'End Task' button.

What if it won’t connect to internet?

Verify that you are connected to the correct network. Follow Step 5 or Step 6 depending on your connection mode. Check that internet source is working properly. Turn Off and On the Wi-Fi on the laptop.

What if the laptop won’t turn on?

Connect the laptop to power following Step 4. Check again after a few minutes. If problem persists, please contact support.

What if the laptop won’t charge?

Please check that the outlet is working by trying to connect another device to it. Verify that all cables are connected correctly. Test with another power source and/or cable if available.